RFSoC Boards & Solutions

ZU28/ZU27/ZU25DR The ZU28/ZU27/ZU25DR category is a dedicated workspace for developers working with AMD/Xilinx’s legacy Zynq UltraScale+ RFSoC Gen 1 (8-channel) devices. This space supports engineers maintaining, upgrading, or building cost-optimized applications on these highly successful first-generation chips. ZU49/ZU39/ZU29DR The ZU49/ZU39/ZU29DR category is a highly specialized forum space dedicated to AMD/Xilinx’s flagship, high-channel-count Zynq UltraScale+ RFSoC Gen 3 devices. This category is built for hardware designers, DSP engineers, and system architects who are leveraging these specific silicon parts (often deployed in high-density System-on-Modules (SoMs) or PCIe boards). ZU67/ZU65/ZU64/ZU63DR The ZU67/ZU65/ZU64/ZU63DR category is a specialized engineering hub dedicated to AMD/Xilinx’s highly efficient Zynq UltraScale+ RFSoC DFE (Digital Front End) devices. This space supports hardware designers and radio systems engineers working on next-generation wireless infrastructure, 5G NR (New Radio) deployments, and digital beamforming. ZU48/ZU47/ZU43DR The ZU48/ZU47/ZU43DR category is a specialized developer hub focused entirely on AMD/Xilinx’s mid-to-high-range Zynq UltraScale+ RFSoC Gen 3 (8-channel) devices. This category serves engineers and developers designing high-throughput, latency-critical systems built on these specific architectures.

Topic	Views	Activity
About the RFSoC Boards & Solutions category RFSoC Boards & Solutions g42m-zu49dr , g60m-zu48dr , g79m-zu67-zu65-zu64-zu63dr	16	May 15, 2026
Why does the [DRC PLHDIO-4] error occur during HDIO DRC checks while implementing the IBERT design in Vivado? ZU48/ZU47/ZU43DR g60m-zu428-zu27-zu25dr , ibert-design , drc-plhdio-4-error , hdio-drc-check	17	July 22, 2026
How to resolve FCS errors on G60M during 10G, 25G, 50G, 75G, and 100G Ethernet validation? ZU48/ZU47/ZU43DR g60m-zu48dr , ibert , 100gbe-fcs-error , 100g-ethernet-subsystem-ip , transmitter-equalization-settings	10	July 16, 2026
Does the RF Analyzer tool support runtime configuration of the PLL and sampling rate? ZU49/ZU39/ZU29DR rf-analyzer-tool , fpga-design , internal-pll-enable_disabled , internal-pll-rf-analyzer , g42m-zu49dr , reading-device-config-is-disabled	12	June 18, 2026
What is the difference between ZU49DR standard release FPGA design and ZU49DR 100G Ethernet FPGA design? ZU49/ZU39/ZU29DR zu49dr-100g-ethernet-fpga-design , ddr-speed , pcie-generation-support , rf-sampling-rates , g42m-zu49dr , difference-zu49dr-standard-release-	10	June 16, 2026
Why does "Evaluation License Warning" error is observed? ZU49/ZU39/ZU29DR auto-negotiation-an , link-training-lt , additional-licences , vivado-issues , g42m-zu49dr , evaluation-license-warning , warning-observed-bitstream	9	June 16, 2026
Why does the DMA reset timeout error occur while booting with the 100G-enabled design? ZU49/ZU39/ZU29DR cmac-ip-for-ethernet , gt-reference-clock , fmc-100g-module , g42m-zu49dr , dma-reset	16	May 27, 2026
What is the power consumption of G60M SOM? ZU48/ZU47/ZU43DR g60m-zu48dr , g60m-power-consumption , power-input-requirement , som-power-consumption	18	May 21, 2026
How to copy the PYNQ binaries to SD Card and what are the boot commands? ZU48/ZU47/ZU43DR g60m-zu48dr , copying-pynq-binaries , boot-commands , pynq-binaries , preparing-bootable-media	10	May 12, 2026
How to create SD card partitions and correct 'failed to load system.dtb' issue with G60M? ZU48/ZU47/ZU43DR g60m-zu48dr , sd-card-partitions , failed-to-load-system_dtb-issue , ext4-partition , vfat-partition	13	May 8, 2026
Does the clock files for ZU48DR LMX DAC and LMX ADC be the same? ZU48/ZU47/ZU43DR g60m-zu48dr , zu48dr-lmx-dac-and-adc-clock-files , adc-and-dac-sampling-clocks , reference-clocks , lmx2594-configuration	12	May 8, 2026
What is the procedure for Dynamic Clock Configuration in PYNQ BSP? ZU49/ZU39/ZU29DR pynq-binaries , jupyter-lab , g42m-zu49dr , dynamic-clock-configuration	12	April 29, 2026
What is the power supply part number used in G42D Devkit? ZU49/ZU39/ZU29DR g42m-zu49dr , g42d-devkit , power-supply-part-number	11	April 28, 2026
Why does the error occur that "no XSA or DTS file found" after performing a successful build? ZU48/ZU47/ZU43DR g60m-zu48dr , xsa-dts-error , xsa-file , xsa-issue-during-compilation	14	April 15, 2026
Why a build directory is created in downloaded folder and why is the build directory empty after the petalinux operation? ZU48/ZU47/ZU43DR petalinux-bsp , g60m-zu48dr , build-directory	11	April 15, 2026
Are GEM0 & GEM3 are enabled in the G60M design and to which connector are they connected? ZU48/ZU47/ZU43DR g60m-zu48dr , g60d-devkit , gem0_gem3 , g60m-vivado-design	17	April 15, 2026
How to embed a Python script to run upon startup? Is there a step by step procedure? ZU48/ZU47/ZU43DR g60m-zu48dr , python-application	11	April 7, 2026
Why clock initializtion (init_rf_clks = False) is disabled in Jupyter notebooks? ZU49/ZU39/ZU29DR pynq-prebuilt-binaries , rf-clocks , clock-initialization , g42m-zu49dr , jupyter-notebooks	12	April 7, 2026
Why does "component already exists" error during the BSP build process, and what are the recommended steps for a clean rebuild? ZU48/ZU47/ZU43DR g60m-zu48dr , cleaning-the-build , error:component-already-exists	14	April 6, 2026
How to resolve the "UserWarning: Interrupt irq not created" & where to find UIO device for interrupt pin for IRQ number 12? ZU49/ZU39/ZU29DR pynq-bsp , g42m-zu49dr , interrupt-irq-not-cleared , uio-device-interrupt-pin	13	April 6, 2026
How to resolve the error "AttributeError: Could not find IP or hierarchy ‘radio’ in overlay"? ZU49/ZU39/ZU29DR qpsk-model-validation , qpsk-overlay , g42m-zu49dr , attribute-error , radio-in-overlay	12	April 6, 2026
How the LMK and LMX clock synthesizers are configured for 245.760 MHz, and how to obtain the specific register settings for this frequency? ZU49/ZU39/ZU29DR g42m-zu49dr , lmk_lmx-configuration-files	43	April 6, 2026
How the clock recovery option is provided in GTY transceivers and is there an example design to support it? ZU49/ZU39/ZU29DR recovery-clock-option , g42m-zu49dr , g42d-devkit , gty-transceivers	13	April 6, 2026
Is there an extra license that is needed for cmac_usplus in G42M ZU49DR RFSoC? ZU49/ZU39/ZU29DR g42m-zu49dr , vivado-license , cmac_usplus	14	April 1, 2026
Can the software tools version of PYNQ 3.1 can be modified? ZU48/ZU47/ZU43DR g60m-zu48dr , pynq-3-1-build , qemu-6.2.0 , vivado-vitis-petalinux-2024.1 , ubuntu-22.04	14	April 1, 2026
What is the procedure to be followed for PYNQ SD build in G60M? ZU48/ZU47/ZU43DR g60m-zu48dr , pynq-sd , xdc-and-.tcl-files	16	April 1, 2026
How to generate ADC/DAC clock frequencies with bare-metal code for evaluation in G60M? ZU48/ZU47/ZU43DR g60m-zu48dr , clock-application-note , adcdac-clock-frequencies	15	April 1, 2026
Where should the sdbuild directory be located? ZU48/ZU47/ZU43DR g60m-zu48dr , sdbuild-directory , pynq-root-directory	14	March 31, 2026
How to verify the DPLL lock status of ZL30733 device in G42M ZU49DR SOM? ZU49/ZU39/ZU29DR g42m-zu49dr , dpll-lock-status , zl30733-device , status-registers	14	March 31, 2026
How to use the boot switches on the G42M SOM when the fan sink option is installed? ZU49/ZU39/ZU29DR g42m-zu49dr , boot-switch-access , fan-sink	13	March 30, 2026