Zynq™ 7000

Zynq™ 7000 The essential hub for SoC-FPGA design and embedded ARM integration. This space is dedicated to the Zynq-7000 family, the industry standard for learning and cost-effective SoC deployment. Zynq™ 7020 The essential hub for SoC-FPGA design and embedded ARM integration. This space is dedicated to the Zynq-7020 family, the industry standard for learning and cost-effective SoC deployment.

Topic	Views	Activity
About the Zynq™ 7000 category Zynq™ 7000	3	May 21, 2026
What should the spi max frequency be set and how to enable the SPI driver in kernel? Zynq™ 7020 zynq-7020-g28m , spidev , device-tree , spi-frequency , kernel-configuration	7	May 21, 2026
Which is the default boot device in G28M and how to load the bit stream to SD card? Zynq™ 7020 zynq-7020-g28m , boot-device , bit-stream , fpga-loadb-uboot-zynq	5	May 21, 2026
Is there a seperate document for "Options for Ethernet cable for flashing the SOC"? Zynq™ 7020 zynq-7020-g28m , ethernet-cable-programming , zynq-7020-g28d , uboot-ethernet , qspi-flashing	8	March 20, 2026
Are the Wi-Fi/BT and Micro SD interfaces accessible via independent signals on the G28M SOM? Zynq™ 7020 zynq-7020-g28m , wi-fi_bt-vs-micro-sd , multiplexed-interfaces , sd-card-wifi-conflict , wifi-bluetooth	6	March 20, 2026
What is the supported temperature for 512MB & 1GB G28M SOM? Zynq™ 7020 g28m-zynq-7000 , supported-temperature , operating-temperature , som-temperature-range	5	March 19, 2026
Is it possible to set all bank voltages - Bank 35, 34 and 13 to 2.5V in G28M? Zynq™ 7020 g28m-zynq7020 , bank-voltages , vcco-configuration	7	March 14, 2026
What is the operating temperature range of Zynq 7020 G28M? Zynq™ 7020 zynq-7020-g28m , operating-temperature , zynq-7020-thermal-limits	9	March 14, 2026
What is the Boot mode configuration in Zynq-7000 SODIMM G28M SOM? Zynq™ 7000 g28m-zynq-7000 , boot-mode-resistor , jtag-boot-zynq , qspi-boot-mode	11	February 7, 2026
Is it possible to power Bank 34 & 35 with 2.5V? Zynq™ 7020 zynq-7020-g28m-som , bank-34_35 , ldo-configuration , lvds-support	15	February 5, 2026
What configuration changes are required to boot G28M (Zynq-7020) module via JTAG? Zynq™ 7020 zynq-7020-g28m , boot-from-jtag , vitis-jtag-boot , bare-metal-application	12	January 16, 2026
How to reload the custom bitstream & application in iW-G28M platform using uboot? Zynq™ 7020 zynq-7020-g28m , zynq-7020-1speed , custom-bitstream , fpga-load	11	January 16, 2026
How to configure the PMIC in FSBL for G28M? Zynq™ 7020 zynq-7020-g28m , pmic-clock-in-fsbl , ldo-configuration , pmic-config , petalinux-fsbl-append	10	January 8, 2026