By default, G47M Kintex UltraScale+ SOM is programmed with only U-Boot image in NOR flash. Linux image is not pre-flashed in NOR, which is why the system stops at U-Boot.
Linux can be booted from NOR flash or USB or TFTP.
To boot till Linux:
- For USB boot, please refer to the “USB Boot” section in the Software User Manual.
- For NOR boot, need to flash the Linux image (kernel ITB) into NOR flash by following the “Procedure to program NOR Flash with kernel ITB image”, and then refer to the “NOR Boot” section in the user manual.
Regarding preconfiguration, all SOMs are shipped with the U-Boot image and Kintex FPGA configuration. Linux is not pre-installed by default.
For further product inquiries, please get in touch with our sales team at mktg@iwave-global.com
Please find the detailed product information here:
Kintex™ UltraScale+™ System on Module