i.MX 93

Topic	Views	Activity
About the i.MX 93 category g50m-imx93	2	May 15, 2026
Does i.MX93 chipset support an internal RTC Controller? Will G50M SOM manage the battery and charge it? g50m-im93-osm-som , rtc-controller , rtc_pwr , cr2032 , battery-charging	10	April 15, 2026
Can SDIO be used as GPIO? How to change the SDIO voltage to 1.8V or 3.3V? g50m-imx93-osm-som , sdio-pins-io-level , sd_vsel , sd-io-voltage-configuration	8	April 13, 2026
At what voltage does RGMII operate and provide RMII signal connection along with level translator on G50M OSM SOM? g50m-ims93-osm-som , rgmii-voltage , rmii-signal-connection , voltage-translator	14	April 2, 2026
How much is the estimated power consumption of i.MX93 G50M SOM? g50m-imx93-som , power-consumption , buck-converter , power-specification	8	April 2, 2026
As an end product, how to make sure debug prints are available in G50M SOM? uart-tx-low , serial-console-issue , boot-mode-switch , g50m-imx93-osm-som , boot-from-emmc , emmc-boot-switch	15	January 13, 2026
What is the Software change expected to support A1 CPU from A0 CPU in i.MX93 G50M SOM? zynq-ultrascale-mpsoc , g50m-imx93-som , imx93-bsp-migration , g50m-hab-image , a0_a1-cpu-difference	14	January 8, 2026
What are the debug port specifications, procedure to flash the SD card using UUU tool on Windows and how to make the SD card bootable with rootfs.wic image? g50m-imx93-osm-som , serial-settings , uart , uuu-tool-on-windows , rootfswic-image	25	January 8, 2026
Does all i.MX93 OSM modules use an LGA package? imx93-osm , lga-package , g50m-imx93	11	January 8, 2026
What is the specific voltage level for I/O of uSDHC2 interface (SD2_VSELECT)? and how to change the I/O voltage for uSDHC2 interface? usdhc2-io-voltage , dts-configuration , g50m-imx93-osm-som	23	December 31, 2025
How to identify the net name mapping to DTS (device tree) and reference manual pin name and multiplexing? dts , g50s-imx93-som , pin-multiplexing , imx93-pinfunc	18	December 30, 2025
Can the LVDS pins be configured as GPIOs in G50S i.MX93 SBC? pin-multiplexing , g50s-im93-som , lvds-gpio	15	December 30, 2025
Does L6.1.22 BSP support i.MX93 A1 CPU by default? g50s-im93-som , mk-image , flash.bin , a1-cpu-hab-details	13	December 30, 2025
What are the recommended resistor values (PU or PD) on the customer boards to boot from eMMC in G50M i.MX93 OSM? emmc-boot , g50m-im93-osm-som , boot-mode-resistor	30	December 30, 2025
How to resolve the flashing issue, when the BOOT_SEL1# signal is also connected to UART_C_TX? flashing-issue , boot-signals-muxed , g50m-imx93-osm-som , hardware-conflict	12	December 30, 2025
What is the functionality of the FORCE_RECOV# pin and its logic within the G50M i.MX93 OSM SOM? force_recov , g50m-imx93-osm-som , flash-mode , forcre_recov	18	December 30, 2025

About the i.MX 93 category

g50m-imx93

0

2

May 15, 2026

Does i.MX93 chipset support an internal RTC Controller? Will G50M SOM manage the battery and charge it?

g50m-im93-osm-som , rtc-controller , rtc_pwr , cr2032 , battery-charging

0

10

April 15, 2026

Can SDIO be used as GPIO? How to change the SDIO voltage to 1.8V or 3.3V?

g50m-imx93-osm-som , sdio-pins-io-level , sd_vsel , sd-io-voltage-configuration

0

8

April 13, 2026

At what voltage does RGMII operate and provide RMII signal connection along with level translator on G50M OSM SOM?

g50m-ims93-osm-som , rgmii-voltage , rmii-signal-connection , voltage-translator

0

14

April 2, 2026

How much is the estimated power consumption of i.MX93 G50M SOM?

g50m-imx93-som , power-consumption , buck-converter , power-specification

0

8

April 2, 2026

As an end product, how to make sure debug prints are available in G50M SOM?

uart-tx-low , serial-console-issue , boot-mode-switch , g50m-imx93-osm-som , boot-from-emmc , emmc-boot-switch

0

15

January 13, 2026

What is the Software change expected to support A1 CPU from A0 CPU in i.MX93 G50M SOM?

zynq-ultrascale-mpsoc , g50m-imx93-som , imx93-bsp-migration , g50m-hab-image , a0_a1-cpu-difference

0

14

January 8, 2026

What are the debug port specifications, procedure to flash the SD card using UUU tool on Windows and how to make the SD card bootable with rootfs.wic image?

g50m-imx93-osm-som , serial-settings , uart , uuu-tool-on-windows , rootfswic-image

0

25

January 8, 2026

Does all i.MX93 OSM modules use an LGA package?

imx93-osm , lga-package , g50m-imx93

0

11

January 8, 2026

What is the specific voltage level for I/O of uSDHC2 interface (SD2_VSELECT)? and how to change the I/O voltage for uSDHC2 interface?

usdhc2-io-voltage , dts-configuration , g50m-imx93-osm-som

0

23

December 31, 2025

How to identify the net name mapping to DTS (device tree) and reference manual pin name and multiplexing?

dts , g50s-imx93-som , pin-multiplexing , imx93-pinfunc

0

18

December 30, 2025

Can the LVDS pins be configured as GPIOs in G50S i.MX93 SBC?

pin-multiplexing , g50s-im93-som , lvds-gpio

0

15

December 30, 2025

Does L6.1.22 BSP support i.MX93 A1 CPU by default?

g50s-im93-som , mk-image , flash.bin , a1-cpu-hab-details

0

13

December 30, 2025

What are the recommended resistor values (PU or PD) on the customer boards to boot from eMMC in G50M i.MX93 OSM?

emmc-boot , g50m-im93-osm-som , boot-mode-resistor

0

30

December 30, 2025

How to resolve the flashing issue, when the BOOT_SEL1# signal is also connected to UART_C_TX?

flashing-issue , boot-signals-muxed , g50m-imx93-osm-som , hardware-conflict

0

12

December 30, 2025

What is the functionality of the FORCE_RECOV# pin and its logic within the G50M i.MX93 OSM SOM?

force_recov , g50m-imx93-osm-som , flash-mode , forcre_recov

0

18

December 30, 2025

NXP Boards & Solutions i.MX 93